ZELLAMID® 900 rods and tubes up to Ø 500 mm
highest quality without center porosity
In November 2005, Zell-Metall was the first company worldwide to offer 500 mm diameter acetal rods and tubes. Benefits of utilizing larger diameter rods for fabricators is to increase yields and lower out-the-door costs. In the past when large round profiles were needed for a project, fabricators were limited to cutting profiles out of plate which could result in poor yields and wasted time on excessive machining.
ZELLAMID® 900 is available in the following large diameters:
- 350 mm
- 400 mm
- 450 mm
- 500 mm
- Length: 1,000 mm
Acetal rods in these dimensions are available in black color as well (ZELLAMID® 900 SW). Minimum order quantities for both ZELLAMID® 900 and ZELLAMID® 900 SW rods apply.
ZELLAMID® 900 tubes can also be delivered with a maximum outer diameter of 500 mm and a length of 1,000 mm. Minimum order quantities apply.
Outer diameter | Inner diameter |
mm | mm |
400 | 200 |
400 | 300 |
450 | 200 |
450 | 300 |
500 | 200 |
500 | 300 |
500 | 375 |